Cisco 642-427 Certification Exam plays an important role on your way to get the Exam.
Cisco certification is a popular certification among those students who want to pursue their careers in this field. Most candidates want to pass Cisco exam but couldn't find the best way to prepare it. Fortunately, Ipass4Sures provides you with the most reliable practice exams to master it. Our Cisco questions and answers are certified by the senior lecturer and experienced technical experts in the Cisco field. These test questions provide you with the experience of taking the actual test.
Ipass4Sures 642-427 contains all the knowledge points required in the Cisco 642-427 actual test Exam. It will be updated in time according to the change of the Real 642-427 exam to make sure that our customers get the most valuable material for the 642-427 exam. There is no need for our customers to buy other sources.
If you are unconfident about our Ipass4Sures 642-427 exam prep, you have the right to test it. We have free demo online and free demo download. It is up to you to choose any one of the two ways to test our product quality.
The Ipass4Sures 642-427 test prep is designed based on the requirement of the Cisco 642-427 Certification Exam. So it hits the point and saves you a lot of time to prepare for the testing. It is also a comprehensive one. We promise that only our product is enough for you to pass the 642-427 exam successfully.
Because of its authoritative sources, Ipass4Sures 642-427 dumps have been approved to be the key material to IT professional career. Only authoritative experts and famous authors have the access to its composition to make sure that its quality and value.
Considering the need of our customers, we offer 7x24 services. We are responsible for all the questions and needs about the Ipass4Sures 642-427 PDF and we are willing to solve problems related to the technical questions for you. Customers satisfaction is what we are pursuing for.
Ipass4Sures 642-427 Exam Prep offers free 642-427 demo trial. You can check out its interface, question quality and usability before you decide to buy it. In this way, you are never worried about buying it with regret.
Are you ready and confident to pass the Cisco 642-427 Certification exam? Ipass4Sures 642-427 will be your favorable aid because its quality is wonderful enough to guarantee your pass 642-427 vce download exam. Even if you failed to pass, we will give you 100% REFUND or two other similar tests freely for compensation.
Cisco certification is a popular certification among those students who want to pursue their careers in this field. Most candidates want to pass Cisco exam but couldn't find the best way to prepare it. Fortunately, Ipass4Sures provides you with the most reliable practice exams to master it. Our Cisco questions and answers are certified by the senior lecturer and experienced technical experts in the Cisco field. These test questions provide you with the experience of taking the actual test.
Ipass4Sures 642-427 contains all the knowledge points required in the Cisco 642-427 actual test Exam. It will be updated in time according to the change of the Real 642-427 exam to make sure that our customers get the most valuable material for the 642-427 exam. There is no need for our customers to buy other sources.
The Ipass4Sures 642-427 test prep is designed based on the requirement of the Cisco 642-427 Certification Exam. So it hits the point and saves you a lot of time to prepare for the testing. It is also a comprehensive one. We promise that only our product is enough for you to pass the 642-427 exam successfully.
Because of its authoritative sources, Ipass4Sures 642-427 dumps have been approved to be the key material to IT professional career. Only authoritative experts and famous authors have the access to its composition to make sure that its quality and value.
Considering the need of our customers, we offer 7x24 services. We are responsible for all the questions and needs about the Ipass4Sures 642-427 PDF and we are willing to solve problems related to the technical questions for you. Customers satisfaction is what we are pursuing for.
Ipass4Sures 642-427 Exam Prep offers free 642-427 demo trial. You can check out its interface, question quality and usability before you decide to buy it. In this way, you are never worried about buying it with regret.
Are you ready and confident to pass the Cisco 642-427 Certification exam? Ipass4Sures 642-427 will be your favorable aid because its quality is wonderful enough to guarantee your pass 642-427 vce download exam. Even if you failed to pass, we will give you 100% REFUND or two other similar tests freely for compensation.
Question: 1
Where does an IP phone obtain the extension number and speed-dial settings from?
A. the settings that are configured on the physical phone
B. the registration file that the phone receives from the Cisco Unified Communications Manager
C. the device and line configuration in Cisco Unified Communications Manager, during the registration process
D. the default device profile that is configured in Cisco Unified Communications, Manager
Answer: C
Explanation:
When we configure IP phone profile in CUCM that time we also configure extension number and speed dial as per requirement. When IP reachability gets establish between IP phone and CUCM then phone will download config file from CUCM during initial registration process.
Reference:
Question: 2
Which web-based application that is accessed via the Cisco Unified Communications Manager Administration GUI generates reports for troubleshooting or inspecting cluster data?
A. Cisco Unified Serviceability alarms
B. Cisco Unified RTMT Trace and Log Central
C. Cisco Unified RTMT Monitor
D. Cisco Unified Reporting tool
Answer: D
Explanation:
Reference:
Question: 3
Which statement about device mobility is true?
A. When local route groups are used, there is no need to configure device mobility groups or phone device CSSs as long as phone line CSSs are used.
B. When local route groups are used, you must configure device mobility groups and phone device CSSs.
C. When the device mobility group at the home device pool and roaming device pool are not the same, the Phone will keep the home region.
D. When device mobility groups at the home device pool and roaming device pool are the same, the phone will keep the home MRGL setting.
Answer: A
Question: 4
Refer to the SDI trace in the exhibit A PSTN call arrived at the MGCP gateway that is shown in the SDI trace. If the caller ID that is displayed on the IP phone is 087071 222 and the HQ_clng__pty_CSS contains the HQ_cing_pty_Pt partition, which exhibit shows the correct gateway digit manipulation"?
A. Exhibit A
B. Exhibit B
C. Exhibit C
D. Exhibit D
Answer: D
Explanation: -
Actual incoming number is 14-087071 222 but next to this information in trace we can see two digits are stripped which is international code hence D is valid answer.
Question: 5
When a database replication issue is suspected, which three tools can be used to check the database replication status? (Choose three.)
A. Cisco Unified Communications Manager RTMT tool
B. Cisco Unified Communications Manager Serviceability interface
C. Cisco Unified Reporting D. Cisco Unified Communications Manager CLI interface
E. Cisco IP Phone Device Stats from the Settings button
F. Cisco Unified OS Administration interface
Answer: A, C, D
Explanation:
Reference:
Question: 6
Which of these reasons can cause intrasite calls within a Cisco Unified Communications Manager cluster to fail?
A. The route partition that is configured in the CCD requesting service is not listed in the calling phone CSS
B. The trunk CSS does not include the partition for the called directory number.
C. The MGCP gateway is not registered
D. The calling phone does not have the correct CSS configured
E. The calling phone does not have the correct partition configured.
Answer: D
Explanation: -
To make a successful call within CUCM cluster following condition should satisfy. No CSS, No partitions are used for call routing, default call routing hence any phone can call any phone within same CUCM cluster. If we want to configure call restriction then CSS and partitions are must, if we don’t configure required partition in CSS then call will not be successful.
Reference:
Question: 7
Refer to the exhibit.
Where does an IP phone obtain the extension number and speed-dial settings from?
A. the settings that are configured on the physical phone
B. the registration file that the phone receives from the Cisco Unified Communications Manager
C. the device and line configuration in Cisco Unified Communications Manager, during the registration process
D. the default device profile that is configured in Cisco Unified Communications, Manager
Answer: C
Explanation:
When we configure IP phone profile in CUCM that time we also configure extension number and speed dial as per requirement. When IP reachability gets establish between IP phone and CUCM then phone will download config file from CUCM during initial registration process.
Reference:
Question: 2
Which web-based application that is accessed via the Cisco Unified Communications Manager Administration GUI generates reports for troubleshooting or inspecting cluster data?
A. Cisco Unified Serviceability alarms
B. Cisco Unified RTMT Trace and Log Central
C. Cisco Unified RTMT Monitor
D. Cisco Unified Reporting tool
Answer: D
Explanation:
Reference:
Question: 3
Which statement about device mobility is true?
A. When local route groups are used, there is no need to configure device mobility groups or phone device CSSs as long as phone line CSSs are used.
B. When local route groups are used, you must configure device mobility groups and phone device CSSs.
C. When the device mobility group at the home device pool and roaming device pool are not the same, the Phone will keep the home region.
D. When device mobility groups at the home device pool and roaming device pool are the same, the phone will keep the home MRGL setting.
Answer: A
Question: 4
Refer to the SDI trace in the exhibit A PSTN call arrived at the MGCP gateway that is shown in the SDI trace. If the caller ID that is displayed on the IP phone is 087071 222 and the HQ_clng__pty_CSS contains the HQ_cing_pty_Pt partition, which exhibit shows the correct gateway digit manipulation"?
A. Exhibit A
B. Exhibit B
C. Exhibit C
D. Exhibit D
Answer: D
Explanation: -
Actual incoming number is 14-087071 222 but next to this information in trace we can see two digits are stripped which is international code hence D is valid answer.
Question: 5
When a database replication issue is suspected, which three tools can be used to check the database replication status? (Choose three.)
A. Cisco Unified Communications Manager RTMT tool
B. Cisco Unified Communications Manager Serviceability interface
C. Cisco Unified Reporting D. Cisco Unified Communications Manager CLI interface
E. Cisco IP Phone Device Stats from the Settings button
F. Cisco Unified OS Administration interface
Answer: A, C, D
Explanation:
Reference:
Question: 6
Which of these reasons can cause intrasite calls within a Cisco Unified Communications Manager cluster to fail?
A. The route partition that is configured in the CCD requesting service is not listed in the calling phone CSS
B. The trunk CSS does not include the partition for the called directory number.
C. The MGCP gateway is not registered
D. The calling phone does not have the correct CSS configured
E. The calling phone does not have the correct partition configured.
Answer: D
Explanation: -
To make a successful call within CUCM cluster following condition should satisfy. No CSS, No partitions are used for call routing, default call routing hence any phone can call any phone within same CUCM cluster. If we want to configure call restriction then CSS and partitions are must, if we don’t configure required partition in CSS then call will not be successful.
Reference:
Question: 7
Refer to the exhibit.
When a Cisco IP Communicator phone roams from San Jose (SJ) to RTP, the Cisco IP Communicator physical location and the device mobility group change from SJ to RTP All route patterns are assigned a route list that points to the local route group All device pools are configured to use the local route group Which statement is true when the roaming phone places an AAR call?
A. Since globalized call routing is not configured, then the SJ gateway will be used in this case
B. The phone will use the AAR CSS that contains the SJ_PSTN partition. The call will egress at the SJ gateway
C. The phone will use the AAR CSS that contains the RTP_PSTN partition. The call will egress at the SJ gateway
D. The phone will use the AAR CSS that contains the SJ_PSTN partition. The call will egress at the RTP gateway.
E. The phone will use the AAR CSS that contains the RTP_PSTN partition The call will egress at the RTP gateway
Answer: D
Explanation:
Cisco Unified Communications Manager Version 7.0 introduced the Local Route Group feature. When using local route groups, gateway selection is totally independent of the matched route pattern and referenced route list and routegroup. The use of the Local Route Group feature makes no changes regarding roaming-sensitive settings. The application of these settings always makes sense when roaming between sites. The settings have no influence to the gateway selection and the dial rules that a user must follow. However, the dial planrelated part of Device Mobility changes substantially withthe new dial plan concept, This concept allows a roaming user to follow the home dial rules for external calls but use the local gateway of the roaming site In this case, When the device mobility group is not the same for San Jose and RTP, the Device Mobility related settings are not applied. The phone device keeps its San Jose-specific configuration Despite the San Jose-specific configuration on the phone, the PSTN calls that originate from the roaming phone are routed via the local PSTN gateway (RTP GW) and are based on the route list and device pool local route group settings. The San Jose-specific dial plan is used. Also, AAR remains configured with the San Jose-specific configuration, but if the San Jose dial plan and San Jose AAR CSS permit and if the AAR group contains the prefix that can be applied in RTP, then AAR can work
Question: 8
Refer to the exhibits.
Low latency queuing has been implemented on the HO and BR1 routers to allow five G.729 calls. Callers are still experiencing poor audio, in particular choppy and delayed audio during traffic congestion. This problem occurs even with just one active call. Which two actions will solve the issue?
A. Change the codec type to G 711. J
B. Configure RSVP call admission control
C. Configure L ink Fragmentation and Interleave on the WAN links
D. Configure RTP header compression on the WAN links
E. Increase the priority queue bandwidth to 80 Kb/s
F. Configure location settings in Cisco Unified Communications Manager to 1 20 Kb/s
Answer: C,D
Explanation: -
below link is very good to understand this concept.
Reference:
Question: 9
Refer to the exhibit.
When calling 911, which gateway/route list is defined in the route pattern in Cisco Unified Communications Manager and used to route matched digits to the PSTN? A. SEP002290BA361B B. standardLocalRG C. RouteListCdrc D. LRG_RL E. nodeld = 1 F. BRANCH
Answer: D
Explanation: -
logs clearly showing route list name.
Question: 10
Which Cisco Unified Communications Manager troubleshooting tool can be used to look at detailed specific events, such as dial plan digit analysis, as they die happening?
A. traceroutes
B. RTMT real-time trace
C. Cisco Unified Communications Manager alerts
D. Cisco Unified Dialed Number Analyzer
E. RTMT performance log viewer
F. syslog output
Answer: B
